The same serious strength you expect from Original Gorilla Glue, in a dries white, faster formula. White Gorilla Glue is a 100% waterproof glue, safe for indoor and outdoor use and strong enough to stand up to the elements. The white glue easily bonds foam, wood, metal, ceramic, stone and much more! White Gorilla Glue is a moisture activated adhesive. It is important to replace the cap tightly, and store in a cool, dry place. You should expect a year shelf life.
Directions: If you’re using White Gorilla Glue for the first time, we always recommend trying a test piece first. All surfaces must be clean, dust free and tight fitting. For shiny surfaces, such as metals, glass and some plastics, roughen up the material to give the glue something to bite into. Lightly dampen one surface with water. We recommend using a damp cloth or spraying with water. Do not saturate the surface. For dense hardwoods, lightly dampen both surfaces prior to gluing. Carefully apply a paper thin layer of White Gorilla Glue onto the other, dry surface. Do not over apply. We recommend wearing gloves or spreading the glue with a disposable brush. Clamp the two surfaces together tightly. Make sure the clamping pressure is distributed evenly across the surface. Or, if you don’t have a clamp, use heavy objects or Gorilla Tape to achieve the appropriate clamping pressure.
For lighter objects, try using rubber bands to hold the pieces together tightly. Clamp objects for 30–60 minutes. For best results, allow 24 hours to cure. If you need to remove any uncured “squeeze out” or wet glue, we recommend wiping with a dry cloth or using a standard paint thinner. Once the glue is dry, it is best removed mechanically: Try sanding, chiseling, scraping or picking. After each use, wipe lid and nozzle clean with a dry cloth.